ALEMADR-DB Dry Bath Incubator RT-25 to 100C

ALEMADR-DB — Dry Bath Incubator RT 5 to 100°C Catalog (PDF) RT 5–100°C control 0–100°C setting ≤±0.3°C @37°C Auto-recognized blocks Adjustable heating lid OVERVIEW The ALEMADR-DB (and cooling model ALEMADR-DBC) is a sophisticated dry bath incubator designed for precise heating and cooling, controlled by a semiconductor system. Automatic temperature control and a flexible timer make it highly versatile for daily laboratory workflows. A key advantage is the combined temperature control and block system: each interchangeable block includes its own built-in temperature sensor and heating/cooling unit, enabling accurate control and faster heating. Blocks are auto-recognized for simple setup, and the adjustable heating lid supports controlled lid temperature for condensation-sensitive procedures. Multi-point and multi-cycle modes (up to 5 points and 99 cycles), auto restart after power failure, over-heating protection and built-in temperature calibration provide robust performance for routine and advanced applications requiring reliable temperature control. ALEMADR-DB dry bath incubator – semiconductor controlled, interchangeable auto‑recognized blocks, adjustable heating lid, multi‑step programming, and optional cooling model down to –10°C setting. Achieve ≤±0.3°C accuracy at 37°C and fast heat‑up (≤12 min 25→100°C). Perfect for PCR prep, enzymatic assays, and sample incubation. COLO.Science · Reliable temperature control for your laboratory. COLO.SCIENCE KNOWLEDGE Learn more about dry bath incubators in practice Explore COLO.Science application notes and selection tips for dry block incubation, PCR preparation and temperature‑controlled sample workflows. Read on COLO.Science → TYPICAL APPLICATIONS Sample incubation at controlled temperature in microtubes and microplates (via optional blocks) Enzymatic reactions and temperature holds for molecular biology workflows PCR preparation steps where stable block temperature is required Heat treatment and conditioning of small-volume samples Cold storage workflows (cooling model ALEMADR-DBC) at 4°C Routine temperature-controlled protocols in clinical, research and QC laboratories MODELS & DIMENSIONS Model Temp setting range Temp control range Dimensions / weight ALEMADR-DB 0–100°C RT 5–100°C 300 × 200 × 210 mm / 4.0 kg ALEMADR-DBC –10–100°C RT–25–100°C 300 × 200 × 210 mm / 4.7 kg Key Advantages of ALEMADR‑DB Series Smart Block Recognition Each interchangeable block contains its own sensor and heating/cooling unit. When inserted, the instrument automatically recognizes the block type and applies the correct calibration – no manual adjustments needed. Multi‑Step Programming Store and run up to 5 temperature points with individual hold times, and repeat the entire cycle up to 99 times. Ideal for complex protocols like heat shock or enzymatic digestions. Adjustable Heated Lid Prevent condensation on tube lids by independently controlling the lid temperature from OFF up to 10°C above block temperature. Essential for long incubations and PCR setups. Cooling Model Available The ALEMADR‑DBC variant extends the control range down to –10°C setting (actual block temperature as low as RT–25°C), enabling storage at 4°C and rapid cooling after heat steps. TECHNICAL SPECIFICATIONS Product models ALEMADR-DB / ALEMADR-DBC Temp setting range DB: 0–100°C; DBC: –10–100°C Temp control range DB: RT 5–100°C; DBC: RT–25–100°C Time range 1 sec–99 min 59 sec / 1 min–99 h 59 min / ∞ Temp accuracy ≤±0.3°C @37°C Display accuracy 0.1°C Temp uniformity ≤±0.3°C @37°C Heating time ≤12 min (25°C → 100°C) Cooling time 1 DBC: ≤12 min (100°C → 25°C) Cooling time 2 DBC: ≤25 min (RT → RT–25°C) Heating lid temp setting range OFF ~ 10°C Heating lid temp accuracy ≤±0.5°C* Heating lid heating time ≤10 min (25°C → 100°C) Storage at 4°C DBC: Yes Multi points running Yes (max 5 points) Multi cycle Yes (max 99 times) Auto running / auto heating / auto resume Yes / Yes / Yes Capacity See optional block Power 150 W Voltage AC100 or AC220 V / 50–60 Hz Fuse 250 V, 3 A, Φ5×20 Dimensions (mm) 300 × 200 × 210 Weight (kg) DB: 4.0; DBC: 4.7 STANDARD DELIVERY & ACCESSORIES ALEMADR-DB dry bath incubator main body Power cable / basic installation accessories User manual / quick start guide One optional block (as selected in the offer / order) Optional blocks (examples): PRO4540 — 35 × 2.0 ml centrifuge tube (RT–25–100°C) * PRO4541 — 35 × 1.5 ml centrifuge tube (RT–25–100°C) * PRO4542 — 54 × 0.5 ml centrifuge tube (RT–25–100°C) * PRO4543 — 96 × 0.2 ml centrifuge tube (RT–25–100°C) * PRO4544 — 96 × 0.2 ml ELISA plate (RT–25–100°C) * PRO4545 — 35 × 2.0 ml centrifuge tube (RT 5–100°C) PRO4546 — 35 × 1.5 ml centrifuge tube (RT 5–100°C) PRO4547 — 54 × 0.5 ml centrifuge tube (RT 5–100°C) PRO4548 — 96 × 0.2 ml centrifuge tube (RT 5–100°C) PRO4549 — 96 × 0.2 ml ELISA plate (RT 5–100°C) *Blocks PRO4540–PRO4544 are for the cooling model ALEMADR-DBC. MAIN TECHNICAL PARAMETERS Model ALEMADR-DB (Main body) / ALEMADR-DBC (Cooling model) Temp control range DB: RT 5–100°C; DBC: RT–25–100°C Accuracy / uniformity (@37°C) ≤±0.3°C / ≤±0.3°C Heating time ≤12 min (25°C → 100°C) Heating lid control OFF ~ 10°C; ≤±0.5°C* Multi-point / multi-cycle Yes (max 5 points) / Yes (max 99 cycles) Power / voltage 150 W / AC100 or AC220 V, 50–60 Hz Dimensions 300 × 200 × 210 mm Weight DB: 4.0 kg; DBC: 4.7 kg *Heating lid temperature accuracy per catalog specification. ALEMADR-DB — Dry Bath Incubator RT 5 to 100°C ALEMADR-DB is ideal when you need a versatile dry bath incubator with interchangeable auto‑recognized blocks, adjustable heating lid and multi‑step programming – supported by COLO.Science. Request a Quote for ALEMADR-DB Download Technical Specifications COLO.Science Support COLO.Science · Reliable temperature control for your laboratory. SKU: PRO4348, PRO6372 Category: Dry Bath Incubator Tag: Special offers